Newshttp://www.imc4cnc.comumbracoIMC NewsenBrake Press Operatorhttp://www.imc4cnc.com/2010/8/23/brake-press-operator.aspxMon, 23 Aug 2010 11:04:54 GMThttp://www.imc4cnc.com/2010/8/23/brake-press-operator.aspxMinimum 2 years experiance required

Basic Skills Required:

  • Advanced sheet metal blue print reading skills, including the ability to calculate flat blank layouts.
  • Interact with Process Engineers to determine process improvement suggestions.
  • CNC Press Brake knowledge, including set-up and operation.
  • Ability to perform any and all required quality checks and layouts on parts.
  • Have good, proven history of working well with fellow team members in a limited leadership role.
  • Strong communication skills, verbally and written.
  • Own tools (basic to the trade)

Bonus Skills:

  • Ability to program any of the specified CNC equipment listed above.
  • CAD experience, specifically Inventor Software.
]]>Maintenance Manhttp://www.imc4cnc.com/2010/8/23/maintenance-man.aspxMon, 23 Aug 2010 10:55:57 GMThttp://www.imc4cnc.com/2010/8/23/maintenance-man.aspx

Minimum 2 years of experience Required

Must have basic knowledge of electrical maintenance including:

Ability to wire single phase 110v and 220v wiring. Ability to wire three phase up to and including 480v wiring. Must have basic knowledge of mechanical maintenance. Ability to replace belts, gears, bearings, and other mechanical components. Must have basic knowledge of pneumatic maintenance. Ability to run air lines, change filters, as well as other pneumatic components. Must have basic knowledge of building maintenance. Ability to perform building maintenance such as light or small construction projects. Ability to operate saws, drills, and other equipment to maintain the company's property  Ability to operate fork trucks and lifts. Must be responsible for performing all preventive maintenance on equipment. Perform all preventive maintenance requirements and record them in system. Assist maintenance lead and others in projects when needed. This includes some production if projects are complete in maintenance department Must have valid driver license. Operate in a safe and clean manner at all times. Be will to work over or off hours when needed to ensure maintenance issue are resolved and production can continue. This would include occasionally starting early or staying late. Also could include some weekend work. ]]>New PMA Golf Outing Datehttp://www.imc4cnc.com/2010/7/12/new-pma-golf-outing-date.aspxMon, 12 Jul 2010 08:46:49 GMThttp://www.imc4cnc.com/2010/7/12/new-pma-golf-outing-date.aspx 

                                                 golf

IMC, as a member of the Indiana District Precision Metalworkers Association, will be partipating in the PMA Golf Scramble on August 26, 2010.  All IMC Customers are welcome to join us as our guest. 

Shotgun start 1:00 p.m.

Dinner & prizes following round

Hillview Country Club  www.hillviewcountryclub.net

1800 E. King St.

Franklin, IN

 Email nancy@imc4cnc.com or call 502-643-0908 if you would like to join us!

]]>New Positions Available!http://www.imc4cnc.com/2010/6/25/new-positions-available!.aspxFri, 25 Jun 2010 08:44:23 GMThttp://www.imc4cnc.com/2010/6/25/new-positions-available!.aspxLaser Operator
Applicants must be able to create programs, read blue prints, inspect parts, understand tech tables, and adjust focal points. This is a first shift position. First shift runs from 6:00 a.m. to 4:30 p.m. on Monday through Thursday or Tuesday through Friday.

Turret Operator
Applicants must be able to create and edit programs, setup jobs, sharpen tools, understand die clearance, read blue prints, and inspect parts.  This is a second shift position. Second shift runs from 4:30 p.m. to 3:00 a.m. on Monday through Thursday.

Applicants for both positions need to have good written and oral communication skills so that they can read and comprehend routers and work instructions.

Please apply onsite at 5802 Elmwood Ave, Indianapolis, Indiana, 46203 or email your resume to jobs@imc4cnc.com.

]]>Ivy Tech Community College classes at IMC Corporationhttp://www.imc4cnc.com/2010/6/15/ivy-tech-community-college-classes-at-imc-corporation.aspxTue, 15 Jun 2010 15:09:44 GMThttp://www.imc4cnc.com/2010/6/15/ivy-tech-community-college-classes-at-imc-corporation.aspxThis year two training classes instructed by Ivy Tech Community College have been very successful. Our first group had an average learning gan of 90% and the second group had an average gain of 49%.  Everyone that attended the classes also passed the online NIMS test and are now certified in Measurement, Materials and Safety.  A Hispanic class is in progress right now and will be followed by one more English class.  We can all be proud that by the end of 2010, everyone in our shop will have attended the classes and have their certificates in Measurement, Materials and Safety!  The skill of our employees is what makes IMC Corporation one of the top fabricators in our region.

]]>Special thanks to Charlie Stockton!!http://www.imc4cnc.com/2010/4/20/special-thanks-to-charlie-stockton!!.aspxTue, 20 Apr 2010 11:52:54 GMThttp://www.imc4cnc.com/2010/4/20/special-thanks-to-charlie-stockton!!.aspxAt age 63 and with 44 years at IMC Corporation, Charlie Stockton is retiring.  IMC Corporation appreciates your hard work and dedication over the last 44 years. We will miss you and we wish you all the best!!!

charlie retirement

]]>Annual PMA Golf Outing June 14http://www.imc4cnc.com/2010/3/25/annual-pma-golf-outing-june-14.aspxThu, 25 Mar 2010 13:39:29 GMThttp://www.imc4cnc.com/2010/3/25/annual-pma-golf-outing-june-14.aspxIMC Corporation is a member of the PMA Precision Metalworking Association Indiana District.  IMC Corporation owner, Ernie Huber is an Officer of the Indiana Chapter serving as Treasurer.

PMA is the full-service trade association representing the $91-billion metalforming industry of North America-the industry that creates precision metal products using stamping, fabricating and other value-adding processes. Its nearly 1,200 member companies include metal stampers, fabricators, spinners, slide formers and roll formers as well as suppliers of equipment, materials and services to the industry. Members are located in 30 countries. The majority are found in North America―including 41 states of the United States as well as Canada and Mexico.

We welcome our customers to come out and play on IMC Corporation's team at the Annual PMA Golf Outing.   

  • June 14, 2010
  • Hillview Country Club located at I-65 & S.R. 44, Franklin, IN
  • Shotgun start 1:00 p.m. and Dinner & prizes will follow the round

 To play email nancy@imc4cnc.com

pma golf 09

pma indiana dist

]]>Design2Part Trade Show Coming Up April 27, 28http://www.imc4cnc.com/2010/3/25/design2part-trade-show-coming-up-april-27,-28.aspxThu, 25 Mar 2010 13:33:22 GMThttp://www.imc4cnc.com/2010/3/25/design2part-trade-show-coming-up-april-27,-28.aspxd2p

Stop by and visit our booth at the Design2Part show in Schaumburg, IL April 27 and April 28, 2010!  We'll be in booth 413.  Register at the link below for free admission and free parking.

 

www.d2p.com

 

]]>One Southern Indiana Chamber & Economic Development Show!http://www.imc4cnc.com/2010/3/8/one-southern-indiana-chamber--economic-development-show!.aspxMon, 08 Mar 2010 16:22:20 GMThttp://www.imc4cnc.com/2010/3/8/one-southern-indiana-chamber--economic-development-show!.aspxAs a member of One Southern Indiana, IMC will be displaying at the 11th Annual Minority & Women Business Owners Conference.  It will be held at Horseshoe Casino & Hotel in Elizabeth, Indiana on March 18th 2010. 

For more information...click on this link http://www.1si.org/sig_events_2010MWBOC.asp

Or you can go online to register to attend at www.1si.org

 

Hope to see you there!

]]>Interview with Dell Netbook Contest Winnerhttp://www.imc4cnc.com/2010/3/4/interview-with-dell-netbook-contest-winner.aspxThu, 04 Mar 2010 12:22:52 GMThttp://www.imc4cnc.com/2010/3/4/interview-with-dell-netbook-contest-winner.aspxInterview with Kevin of Lantech in Louisville, KY - The winner of IMC's New Website Dell Netbook Contest! 

  •  How do you feel about being the winner of the 2010 New IMC Corporation Website Dell Contest?

             I am still taken by surprise. 

  • What do you think of our new website?                    

          I like the aerial view of your buildings with roll over icons representing your  different deparments.  I thought that was a novel idea. I've been around IMC for 5 or 6 years now and have visited the plants in Indianapolis, so I was already aware of your advantages.  I have seen the result of your efforts during your tenure as one of our suppliers.

  • What results?

Our first experience with IMC parts involved a settling in period, but once the parts started flowing we had little incidence of defects.  The result was better than with any of our other suppliers. 

  • What is your impression of IMC?

         I was impressed when I visited the IMC plants.  The plants were organized and had a lot of capabilities.  Their forming performance is impressive.  Nice square corners.

  • Would you recommend IMC to other manufacturers?

Yes, IMC is customer friendly, easy to work with and responsive to concerns and problems of their customers.

  Congratulations Kevin!

 

]]>